S27T Dual Heads Table Tennis Robot Ping Pong Ball Training Machine Programmable

  

Table Tennis Robot Ping Pong Ball Training Machine Programmable S27T. How to select spin: The spin from shooting head 1 or 2 is selected by adjusting the speed of top-wheel and bottom wheel, and by rotating the motor head of robot.

Each of them can perform 9 different spins: Top spin, under spin, no spin(produced by varying the speed of top and bottom wheel), left side spin, right side spin, left-side top spin, left-side underspin, right-side top spin and right-side under spin. When selecting the spin fom one shooting head, please rotate the other to a particular position that does not affect the movement from each other. Two shooting heads for S27 model can not adjust to be side spin at the same time. Angle from 0 to 45 degree. To use the single head serve, set the ball counter of one ("-"indicates infinite amount) You can also ajust the speed, frequency, spin, landing spot and total number of balls at this point.

Shooting head 1 and 2 takes turn to serve(In general the shooting head 1 begins to serve the first ball when the robot starts;however, broken balls may affect the order of serve). You can ajust their spinspeed, landing spot, and number of balls to form different serving sequences. For example, set the shooting head 1 to top spin, adjust the speed to 7 stage, input 2 balls in the first ball counter, and press #2 position three times. And then set the shooting head 2 to under spin, adjust the speed to 5 stage, input 1 ball in the second ball counter, press #10 position once. Press start key, now the shooting head 1 serves 3 top spin balls at the #2 position, and then shooting head 2 serves 1 under spin ball at the #10 position. If the number of balls from shooting head 1 and 2 are dfferent from the times that have been pressed on position #1-#11, the shooting head 1 and 2 will take turn to serve at each position. There are different kinds of ball produced depends on different number of balls. (Please refer to the different adjustment in this manual). Under "standby"condition, press the "Various serving sequences"key, this light will be turned on. Press /\ or \/ to choose one from the 30 sets of serve sequences. Press start key, and then begins to serve automatically according to the selected sequence. Under this condition, "landing spot" key, "total number of balls" key and "sequences in Random" key are locked temporarily, you can press the "Pause" and press the "Various serving sequences" again to unlock this condition. You can also press either "Sequence in Random" or "Landing spot"to cancel the "Various serving sequences"mode after pausing the robot.

These three function can use this method to cancel each other out. Under "standby" condition, press the "Sequences in random", this light will be turned on. Now the robot randomly selects one sequence in the 30 sets of serve sequences, and then rearanges the serving oorder to form a newsequence.

Theoretically this may product more than 60000 different kinds of serve sequence. (This is only the theoretical result, not the practical one). The landing spot should be selected in the "stand by"condition of robot. The robot can perform three main kinds of serving style: fixed course, standard alternative course and random course.

There are 11 digit keys located at the bottom portion of control box. Now we can press either one of the position, then the light of the corresponding position being turned on.

Start the robot to play after finishing the selection. For example, to play fixed course with the landing spot at the #11 position three times, and at the #3 position twice, we can follow the above procedures, then press the digit "11" key three times and digit "3" key twice. The numbers of ball which land on the same spot depend on how many times you press on the same position key.

You can create as many as combination of the serving style. The control box also has a memory function that memorize the current setting which is capable to play wiht the same setting as next time you start. The #1-#11 landing spot from the control box is referring to the actual landing spot of double head serve as benchmark. When shooting head 1 serve, please select th landing spot in the range from #2-#11. When shooting head 2 serve, please select the landing spot in the range from #1-#10. Ball speed can be adjusted in the "Working" or "Stand by" condition of the robot. This adjustment is applicable to shooting head 1 and 2. The stage-level light on the control box will flash when the power of the robot is on. If the stage doesn't need to be changed, press the start key directly to play. Otherwise, adjust the stage level by pressing the "Increase" or "Decrease "key.

There are totally 10 stages from lowest to highest level. The top wheel and bottom wheel can work at the same time or work independently. The higher the stage being selected, the faster the ball speed will become.

Basically the speed of the ball is proportional to the strength of the spin. If the stages of two wheels are close enough, the ball that has been produced is nearly no spinning.

The control box also has a memory function that memorize the current setting which is capable to play with the same setting as next time you start. With the same modulation method as speed's, the frequency can also be adjusted by pressing the"Increase' or "Decrease key with totally 10 stage level. The lowest stage of frequency is about 25 balls per minute and the highest stage is about 85 balls per minute.

Spread out the ball collection net with both sides. No assembly or tools are required. After finishing your training, fold back the collection ball net in a reverse order of the original process; lock the buckles in a right way. Rolls easily from table for easy storage.

Random balls(1-9);long or short ball(1-9);long ball position red lightA. D short ball position green light A. D; program /random/fixed and adjust mode; set or cancel; mixed and random; on and off. Automatically collect and return balls. Function of time and count.

This selection is for setting the number of balls from the individual shooting head 1 or 2. Shooting head 1 and 2 have the same method of adjustment. Under "Standby"condition, press + and - to input the number 1-9 or infinite("-"indicates infinite)in ball counter.

For example, broken balls may affect the order of serve. (The first few ballsmay be affected and cause inaccurate at this point). Select total number of balls. This is the total numbers from shooting head 1 and 2. Under "standby" condition, press the "ball counter" key, and then change the number by pressing /\ or \/ key. The range of output number is 1999.

Holding the key for fast forward adjustment. Once the robot has started, the number begins counting down. 21"Wide by 47"High by 17Deep. Wide by 1190mm High by 435mm Deep.

Digital Touch Screen Control Pad:1. Order may be cancelled due to insufficient of your information. Missing item or get wrong item or damaged items, or the item seams can not work well, please keep all the items in original condition, make all the items together with packing, then take some photos of them and send us the photos by message box.

(2) How we will react? (sometimes you may be requested to return the incorrect item).

(3) Valid time for returning. We promise to achieve your 100% satisfaction. Thank you so much for your kindness and understanding.